High Manganese Steel Plate
Manganese Steel Plates, Hadfield Austenitic Manganese Plate Supplier in India, Work Hardening" steel Plate Distributor, AUSTENITIC 11-14%Manganese, HADFIELD STEEL, X120Mn12 Manganese Steel Sheets Exporter.
12-14% Manganese Steel, ACRONI X12 Plates, High Manganese Steel Plate Dealer, 11- 14 % MANGANESE PLATE, HADFIELD / ASTM – A128 Gr B2 Plates, GX120Mn12 Plates, 1.3401 – X120Mn13, 12-14% Manganese Steel Plate, X120Mn13 Plates Stockist in Mumbai, India.
Sheffield, 14% Manganese, is a true Hadfield Austenitic Manganese Steel Plate for resistance to severe impact and abrasive wear. This product will work hard in service up to 550 BHN. Because this product hardens under cold work conditions, care should be taken when forming, drilling, or machining is being considered. Sheffield, 14% Manganese, can be welded with standard manganese electrodes. Please use only certified personnel who are familiar with working with this type of material. Drilling is not recommended for this product. Manganese is a gray-white metal with a pinkish tinge and a very brittle but hard metallic element. Manganese is a reactive element that easily combines with water and air. It is a steel with a relatively large component of about 10-14% of manganese; highly resistant to wear and shock. The original austenitic manganese steel contains about 1.2%C and 12% Mn.
WORK HARDENING refers to the fact that the steel becomes harder and harder the more it is impacted or compressed. The “Hadfield” grade has an original hardness of approximately 220 BRINELL. With continued impact and /or compression, it will surface harden to over 550 BRINELL. It should be noted that only the outer skin surface hardens. The underlayer remains highly ductile and tough. As the surface wears, it continually renews itself, becoming harder and harder. Manganese steel is an austenitic steel which means it is non-magnetic. This property makes it useful in many applications, such as bottom plates for lifting magnets – separator drum shells for magnetic materials – wear shoes on electric brakes, etc.
Advantages
• Resistance to high abrasion and severe impact.
• Will work hardened rapidly to 550BHN.
• Remains ductile throughout.
• Hadfield Grade.
• Can be welded.
• Has non-magnetic properties.
• Can be cut with oxy-acetylene torch, plasma, water jet, or laser.
• Made to the toughest standards in the industry for extended service life.
Applications
• Wheelabrators
• Shake-Out Decks
• Shot Blast Cabinets
• Sintering Seal Bars
• Scrappers
• Screens
• Crusher Liners
• Grader Blades
• Elevator Buckets
• Baffle Plates
• Stone Chutes
• Bucket Liners
• Crusher Jaws
• Hammers
• Chain Wear Bars
• Grizzly Bars
High Manganese Steel Plate Specification :
Item : High Manganese Steel Plates
Thickness : 35mm-150mm
Length : 3000mm-18000mm
Width : 1000mm-4500mm
Supply Condition : As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement.
Impact tested : -52° C
Process of Manufacturing : Hot-Rolled (HR)
Manganese Steel Plate Equivalent Grades
| STANDRADS | EURONORM | DIN | ASTM | AFNOR | IS:2000 | IS:1993 | BS |
| GRADES | X120Mn13 | 1.3401 | A128 GR B2 / A128M | X120Mn13 | 276 | 2708 | 3100 |
Manganese Steel Plate Chemical Composition
| Grades | C (%) | Mn (%) | Si (%) | S (%) | P (%) |
| ASTM 128 Gr B2 | 1.05 – 1.2 | 11.5 – 14 | < 1.0 | - | <0.070 |
Mechanical Properties of High Manganese Steel Plate
| YIELD 350 MPa 51 KSI |
TENSILE UTS 20° C (68° F) | ELONGATION | CHARPY Kcvl 20°C (4°F) | HARDNESS BHN |
| 940 MPa 136 KSI | (5d) 40% | >140J/cm2 100 ft. lbs | 220 to 540 |
Conquest Steel and Alloys Also Distribute Other Types of High Manganese Steel Plate Namely :
Manganese Steel Plate, High Manganese Steel Plate, DIN X120Mn12 Manganese Steel Plate, Werkstoff Nr. 1.3401 Manganese Steel Plate, 16 MN Steel Plate, GX120Mn12 grade Manganese Steel Plate, ASTM 128 GRADE B2 Manganese Steel Plate, Manganese Steel Plate, ASTM 128 GRADE B2 Manganese Steel Plate, 12-14% Manganese Steel Plate, HADFIELD STEEL Manganese Steel Plate, X120Mn12 Manganese Steel Plates, High Strength Quenched and Tempered Manganese Steel plates, HADFIELD STEEL, 12-14% Manganese Steel, ASTM 128 GRADE B2, X120Mn12, GX120Mn12, DIN 1.3401, X120Mn12 Manganese Shim Sheets & Plates Based in Mumbai, India.
As exporters of 12-14% Manganese Steel Plates, we assure consistent quality in each of our plate, ready to oblige to demanding businesses, only to increase productivity in the long run.
High Manganese Steel Plate We Supply Globally :
We Supply Our High Manganese Steel Plate to various countries like Saudi Arabia, United States, Mexico, Algeria, Finland, Malaysia, Estonia, Ireland, Portugal, Vietnam, Poland, Mexico, Lebanon, Colombia, Germany, Japan, Nepal, Australia, Yemen, United Arab Emirates, Nigeria, Chile, Azerbaijan, France, Iraq, Qatar, Brazil, Canada, Venezuela, Argentina, Belarus, South Africa, Costa Rica, Kenya, Zimbabwe, Chile, Afghanistan, Belgium, Spain, Philippines, Poland, Hungary, Israel, Croatia, Singapore, Greece, Trinidad & Tobago,Tunisia, India, Libya, Bolivia, Iran, Ghana, Egypt, South Korea, United Kingdom, Nigeria, Ukraine, Peru, Switzerland, Bangladesh, Jordan, Bhutan, Oman, Turkey, Tibet, Pakistan, Kazakhstan, Macau, Hong Kong, Italy, Gabon, Bulgaria, Namibia, Thailand, Ecuador, Iran, Romania, Gambia, Austria, Czech Republic, New Zealand, Indonesia, Taiwan, Norway, Angola, Sweden, Morocco, Netherlands, Puerto Rico, Kuwait, Slovakia, Mongolia, Bahrain, Lithuania, China, Serbia, Russia, Sri Lanka, Denmark.
High Manganese Steel Plate We Supply Worldwide :
We Supply Our High Manganese Steel Plate to various cities like Seoul, Karachi, Indore, Gimhae-si, Montreal, Lahore, Bengaluru, Rajkot, Pune, Houston, Dallas, Thane, Santiago, Edmonton, Jakarta, Visakhapatnam, Madrid, Tehran, Chiyoda, Ernakulam, Singapore, Sydney, Kuwait City, Riyadh, Mexico City, Doha, Nagpur, London, La Victoria, Al Jubail, Noida, New York, Vadodara, Geoje-si, Courbevoie, Lagos, Milan, Dammam, Hong Kong, Calgary, Abu Dhabi, Hanoi, Colombo, Vung Tau, Atyrau, Mumbai, Manama, Jaipur, Chandigarh, Petaling Jaya, Los Angeles, Ludhiana, Haryana, Bangkok, Algiers, Muscat, Gurgaon, Ahmedabad, Howrah, Perth, Port-of-Spain, Navi Mumbai, Melbourne, New Delhi, Sharjah, Brisbane, Faridabad, Nashik, Baroda, Ankara, Granada, Rio de Janeiro, Caracas, Chennai, Al Khobar, Hyderabad, Cairo, Bogota, Secunderabad, Moscow, Coimbatore, Ranchi, Dubai, Kuala Lumpur, Toronto, Thiruvananthapuram, Kanpur, Ulsan, Jamshedpur, Busan, Ahvaz, Kolkata, Istanbul, Bhopal, Ho Chi Minh City, Surat, Jeddah, Pimpri-Chinchwad, Aberdeen.
People Also Searched For
Manganese steel, Work Hardening" steel , AUSTENITIC 11-14%Manganese, Hadfield Steel, optimum wear and work hardening properties, ACRONI X12, 11- 14 % MANGANESE PLATE, X 12, X120Mn13, HADFIELD / ASTM – A128 Gr B2, 1.3401 – X120Mn13